- Número da peça: A350FI-0203-03
- Material: iglidur® A350
- Forma: Buchas flangeadas
- Dimensões:
- d1 0.125 inch
- d2 0.1875 inch
- d3 0.312 inch
- b1 0.1875 inch
- b2 0.032 inch
- Personalize a dimensão
- Método de manufatura: Moldagem por injeção
- Vida útil:
Não disponível
igus-icon-info-circle-gray
- Very good coefficients of friction Low
- Moisture absorption
- Good wear resistance under water
- High media resistance
- Resistant to high loads (>60N/mm²)
- FDA-compliant
- EU 10/2011-compliant
mais IVA e frete
iglidur® A350 | The endurance runner at higher temperatures in the food sector
iglidur® A350 plain bearings are designed so that they can be used for all loads occurring in the food and packaging industry. Even high loads, as occur in lifting devices or presses, are no problem and the bearings function reliably without additional lubrication.
Typical application areas
Food industry
Beverage industry
Medical technology
Here you will find further possible applications:
Industry solutions
When to use it?
| When not to use it?
|
Use our filter options to find the right product for you
Tolerances and measuring system
The installation dimensions and tolerances of the iglidur® plain bearings depend on the material and wall thickness. With the material, the moisture absorption and the thermal expansion are decisive. Plain bearings with low moisture absorption can be installed with small bearing clearance. The following applies to the wall thickness: the thicker the bearings, the greater the bearing clearance must be.
Test procedure
Installation
iglidur® plain bearings are press-fit bearings. The inner diameter is set with the corresponding tolerance only after pressing into the housing bore. The press-fit interference can be up to 2% of the inner diameter. This ensures a secure press fit of the bearings. Axial or radial displacements in the housing are thus reliably avoided.
iglidur® - installation, bonding, machining